Excel Automation is an authorized distributor of Panasonic / Sunx products. Contact us with sales and application support.
Sensor head
| Model No. | EF-S1HS |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Applicable controller | EF-S1C |
| Measurement range (Measurement range) (Note 2, 3, 4) |
8.0 to 20.5 mm 0.315 to 0.807 in (±1 kV range mode) 21.0 to 100 mm 0.827 to 3.937 in (±2 kV range mode) |
| Power indicator | Green LED |
| Ambient temperature | 0 to +40 ℃ +0 to +104 ℉ (No dew condensation), Storage: -20 to +60 ℃ -4 to +140 ℉ |
| Ambient humidity | 35 to 65 % RH, Storage: 35 to 85 % RH |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Material | Enclosure: Heat resistant ABS, Measuring part cover: Stainless steel (SUS304) |
| Cable | 0.09 mm2, 3-core shielded cable, 5 m 16.404 ft long (with controller connector) (Note 5) |
| Weight | Net weight: 90 g approx., Gross weight: 130 g approx. |
Controller
| Model No. | EF-S1C | |
| CE marking directive compliance | EMC Directive, RoHS Directive | |
| Applicable sensor head | EF-S1HS | |
| Supply voltage | 24V DC ± 10% | |
| Current consumption | Normal operation: 50 mA or less, ECO mode: 40 mA or less | |
| Display range (Measurement range) (Note 2) |
-1,000 to 1,000 (±1 kV range mode) -1,999 to 1,999 (±2 kV range mode) |
|
| Repeatability | ±0.3 % F.S.(Note 3) | |
| Linearity | ±0.5 % F.S. (Note 3, 4, 6) | |
| Temperature characteristics | 0.05 % F.S./℃ (Note 3, 5) | |
| Judgment outputs (OUT 1, OUT 2) |
NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between judgment output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) |
|
| Response time | 10 ms, 20 ms (STD), 100 ms, 200 ms, 400 ms, 800 ms switching method | |
| Output operation | OUT1: +potential measurement output or window comparator output OUT2: -potential measurement output or error output |
|
| Short-circuit protection | Incorporated | |
| Analog output (Note 6) | Analog voltage ・Output voltage: 1 to 5 V ・Output impedance: 100 Ω approx. |
|
| Response time | 20 ms, 30 ms (STD), 110 ms, 210 ms, 410 ms, 810 ms switching method | |
| Timing input / 0-adjust input | NPN non-contact input ・Signal condition High: +V or open, Low: 0 to +2 V (source current 0.5 mA or less) ・Input impedance: 10 kΩ approx. |
|
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ – 4 to +158 ℉ |
|
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
| Material | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, Mode key: Acrylic, Jog switch: Heat-resistant ABS | |
| Cable | 0.2 mm2 6-core cabtyre cable, 2 m 6.562 ft long | |
| Cable extension (Note 7) | Extension up to total 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. | |
| Weight | Net weight: 65 g approx., Gross weight: 110 g approx. | |