The INLINE flow sensor/switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/ maximum values of flow. The sensor/switch is made up of a fitting (Type S010) and an electronic module (Type SE10), quickly and easily connected together by a Quarter-Turn. This device indicates the presence of a flow in the pipe by switching the Reed contact contained in the electronic module. The switching points Min./Max. for rising and falling velocities can be set with a screw within a defined range. The SE10 electronic module is available in two versions: -Normally open (NO): The flow switches on the contact. – Normally closed (NC): The flow switches off the contact. These S010 fittings are available in two versions: – with a short blade «Range1» fitted for the fittings DN15 to 40. – with a long blade „Range2“ fitted for the fittings DN32 to 50.
- Economic integration in pipe systems without any additional piping
- Magnetic measuring principle
- Mechanical adjustment of the setpoint
View all Burkert Switch Flow Sensors
Eagle Sensors & Controls, a division of Excel Automation LLC, is an authorized distributor of Burkert products. Contact us with any questions.