This positive displacement flow transmitter with display Type 8076 is designed for use in slightly viscous fluid like glue, honey. The transmitter is made up of a compact fitting (S070) and an enclosure with a cover, containing the electronic module. A removable display completes the transmitter. This ensemble (SE36) is quickly and easily connected to the fitting (S070) by a Quarter-Turn. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, program information to be displayed, program access code, adjust 4-20 mA output(s)…) and also for visualizing continuously the measured and processed data. The device Type 8076 is available with: – 2 programmable outputs: one transistor output (NPN) and one 4-20 mA current output (2-wire) – 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) – 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8076 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.
- Programmable outputs: one or two transistor output(s) and single or dual 4-20 mA current output(s)
- Removable backlit display of flow rate and/or 2 two totalized volumes
- Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow
View all Burkert Oval Gears
Eagle Sensors & Controls, a division of Excel Automation LLC, is an authorized distributor of Burkert products. Contact us with any questions.