Type FF: Flared Seal Fittings
Brass flared seal fittings are well adapted for low to medium
pressure and resistant to mechanical pullout. Available for 3/8″ and 1/2″ diameter tubing with SAE 45° flare.
| Diameter Tubing |
Thread | Part Number |
|---|---|---|
| 3/8″ | 5/8″-18 | FTG-124-101 |
| 1/2″ | 3/4″-16 | FTG-124-104 |
Type HS: Hi-Seal Fittings
Hi-seal brass fittings are highly dependable under the most adverse conditions. For reliable and trouble-free service with ease of installation, we strongly recommend hi-seal fittings.
Available for 3/8″ and 1/2″ diameter tubing. Male thread is 1/2″ NPT for 1/2″ tube and 3/8″ tube.
| Diameter Tubing |
Part Number |
|---|---|
| 3/8″ | FTG-118-124 |
| 1/2″ | FTG-118-116 |
Type RA: 90° Copper Elbow
90° copper elbow is brazed to the Cast-In Heater cooling tube extension with additional tube extension for connecting cooling lines with compression and/or flared fittings.
Available for 3/8″ and 1/2″ diameter tubing. If required, specify.
| Diameter Tubing |
Part Number |
|---|---|
| 3/8″ | FTG-127-102 |
| 1/2″ | FTG-127-103 |
Type RT: Cast Brass 90° Elbow
90° threaded elbow is brazed to the cooling tube extension,
providing an easy and quick method for connecting cooling lines. Recommended to be factory installed to assure good braze seals.
Available for 3/8″ and 1/2″ NPT internal threads. If required, specify.
| Diameter Tubing |
NPT | Part Number |
|---|---|---|
| 1/2″ | 3/8″ | FTG-125-101 |
| 1/2″ | 1/2″ | FTG-125-102 |
Type R3: Straight Threaded Copper Fitting
Straight threaded fitting is brazed to the cooling tube extensions, providing an easy and quick method for connecting cooling lines. Recommended to be factory installed to assure good braze seals.
Available for 3/8″ and 1/2″ diameter tubing with internal threads. If required, specify.
| Diameter Tubing |
NPT | Part Number |
|---|---|---|
| 3/8″ | 3/8″ | FTG-131-103 |
| 1/2″ | 3/8″ | FTG-131-102 |
| 1/2″ | 1/2′ | FTG-131-101 |