Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Length |
5 Junction |
6 Lead Wire Material |
7 Lead Wire Length |
8 ArmorOD/ Cap Size |
9 Termination Style |
10 Special Features |
---|---|---|---|---|---|---|---|---|---|
TA2 |
2 | Calibration |
---|---|
J | Type J |
K | Type K |
T | Type T |
E | Type E |
3 | Sheath Diameter |
---|---|
G | 0.118″ (3mm) |
H | 0.125″ (3.2mm) (1/8″) |
J | 0.156″ (4mm) |
L | 0.188″ (4.8mm) (3/16″) (standard) |
M | 0.236″ (6mm) |
N | 0.250″ (6.4mm) (1/4″) |
P | 0.314″ (8mm) (5/16″) |
Sizes for reference only (Standard tolerances apply) | |
For other diameters consult factory |
4 | Sheath Length |
---|---|
R | 1/4″ |
S | 3/8″ (Standard) |
W | 1/2″ |
X | 5/8″ |
Y | 3/4″ |
Z | 1″ |
5 | Junction |
---|---|
G | Grounded (standard) |
U | Ungrounded |
W | Grounded (Dual Junction) |
Y | Ungrounded Common (Dual) |
6 | Lead Wire Material |
---|---|
H | Fiberglass with armor cable (800°F) (standard) |
J | Fluoropolymer with armor cable (400°F) |
K | Polyimide with armor cable (500°F) |
M | Fiberglass with stainless steel braid with armor cable (800°F) |
W | Fluoropolymer with stainless steel braid with armor cable (400°F) |
L | High temperature fiberglass with armor cable (1200°F) |
Wire gauge determined by ECS based on sheath diameter. For special requirements consult factory |
7 | Lead Wire Length |
---|---|
12-999 |
Over 999″ contact factory |
8 | Armor Cable Diameter/Cap Size |
---|---|
A | 0.275”OD/ 7/16” ID single slot (standard cap) |
B | 0.210”OD/ 7/16” ID single slot (standard cap) |
C | 0.275”OD/ 12.5 mm ID double slot (Metric cap) |
D | 0.210”OD/ 12.5 mm ID double slot (Metric cap) |
E | 0.234”OD/ 7/16” ID single slot (standard cap) |
F | 0..234” OD/ 13 mm ID single slot Werner Pfleiderer cap |
9 | Termination Style |
---|---|
A | 2″ stripped leads (bare ends) |
B | 2″ stripped leads w/ spade lugs |
C | Standard male plug (400°F) |
D | High temp male plug (660°F) |
E | Max temp male plug (800°F) |
G | Solid pin plug |
H | Standard female jack (400°F) |
J | Miniature plug (400°F) |
K | Miniature jack (400°F) |
L | 2″ stripped leads w/ #6 Ring terminals |
N | Standard 3 pin plug w/ ground wire (400°F) |
P | Dual molded male plug (400°F) |
W | 2” stripped leads w/ pin terminals |
Q | 2” stripped leads w/ wire ferrules |
X | Extra long lead wire length (beyond 2” stripped leads) |
10 | Special Features |
---|---|
None | |
01 | Solid conductor (Lead wire) |
04 | Flat tip probe |
05 | Drill point tip |
07 | Cable Clamp |
08 | Bx Connector |
09 | Mating connector |
11 | International IEC 584-3 color coded leads |
12 | British color coded leads |
13 | German color coded leads |
14 | Japanese color coded leads |
15 | Reverse polarity color coded leads |
16 | French color coded leads |
18 | Moisture protection boot on connector |
- Adjustable armor style thermocouples fit a wide variety of hole depths
- Cap spins over entire length of armor. Armor is 0265″ OD
- ECS custom designed armor cable compresses & decompresses easily, ideal for extrusion applications
- 20 AWG stranded wire comes standard for 0.156″ and larger
- 24 AWG stranded wire comes standard for 0.125″ and 0.118″