Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
1 Series |
2 Melt Bolt Style |
3 Melt Bolt Length |
4 Calibration |
5 Tip Diameter |
6 Tip Length |
7 Tip Material |
8 Junction |
9 Armor Cable Length |
10 Termination Style |
11 Special Features |
---|---|---|---|---|---|---|---|---|---|---|
TK2 | A |
2 | Melt Bolt Style |
---|---|
C | Style 1 |
D | Style 2 |
3 | Melt Bolt Length |
---|---|
03 | 3″ |
04 | 4″ |
06 | 6″ |
07 | 7″ |
09 | 9″ |
12 | 12″ |
14 | 14″ |
4 | Calibration |
---|---|
J | Type J |
K | Type K |
T | Type T |
E | Type E |
W | Type J (Special limits) |
X | Type K (Special limits) |
Y | Type T (Special limits) |
Z | Type E (Special limits) |
5 | Tip Diameter |
---|---|
H | 0.125″ OD (standard) |
L | 0.188″ OD |
6 | Tip Length |
---|---|
A | Adjustable from flush to 1″ |
7 | Tip Material |
---|---|
F | 304 SS (standard) |
H | 316 SS |
M | Inconel (600) |
N | 446 SS |
P | 310 SS |
Q | Hastaloy |
R | Pyrosil D |
8 | Junction |
---|---|
G | Grounded (standard) |
U | Ungrounded |
E | Exposed |
W | Grounded (Dual Junction) |
X | Ungrounded & isolated (Dual Junction) |
Y | Ungrounded common (Dual Junction) |
Z | Expose & isolated (Dual Junction) |
9 | Armor Cable Length |
---|---|
X | No flex armor (style 2 only) |
F | 4″ (standard) (style 1 only) |
2-600 |
(style 1 only) | |
over 600″contact factory |
10 | Termination Style |
---|---|
A | 2″ stripped leads (bare ends) |
C | Standard male plug (400°F) |
D | High temp male plug (660°F) |
E | Max temp male plug (800°F) |
G | Solid pin plug |
H | Standard female jack (400°F) |
N | Standard 3 pin plug w/ ground wire (400°F) |
P | Dual molded male plug (400°F) |
11 | Special Features |
---|---|
None | |
07 | Cable Clamp |
08 | Bx Connector |
09 | Mating connector |
18 | Moisture protection boot on connector |
23 | 304SS tag with part # emgraved |
- ECS standard melt bolt thermocouples are mineral insulated for better tip sensitivity and durability