Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
| 1 Series |
2 Calibration |
3 Clamp Size |
4 Lead Wire Material |
5 Lead Wire Length |
6 Junction |
7 Termination Style |
8 Special Features |
|---|---|---|---|---|---|---|---|
| TG2 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Clamp Size |
|---|---|
| Z00 | 7/32” to 5/8” 5/16” band width |
| Z01 | 7/16″ to 25/32″ 5/16″ band width |
| Z02 | 1/2″ to 29/32″ 5/16″ band width |
| Z03 | 11/16″ to 1-1/4″ 5/16″ band width |
| Z04 | 15/16″ to 1-1/2″ 5/16″ band width |
| Z05 | 1-7/16″ to 2″ 5/16″ band width |
| Z06 | 1-11/16″ to 2-1/4″ 5/16″ band width |
| Z07 | 1-15/16″ to 2-1/2″ 5/16″ band width |
| Z08 | 9/16″ to 1-1/16″ 1/2 ” band width |
| Z09 | 11/16″ to 1-1/4″ 1/2 ” band width |
| Z10 | 13/16″ to 1-3/4″ 1/2 ” band width |
| Z11 | 1-1/16″ to 2″ 1/2 ” band width |
| Z12 | 1-9/16″ to 2-1/2″ 1/2 ” band width |
| Z13 | 2-1/16″ to 3″ 1/2 ” band width |
| Z14 | 2-5/16″ to 3-1/4″ 1/2 ” band width |
| Z15 | 2-13/16″ to 3-3/4″ 1/2 ” band width |
| Z16 | 3-1/16″ to 4″ 1/2 ” band width |
| Z17 | 3-9/16″ to 4-1/2″ 1/2 ” band width |
| Z18 | 1-7/8″ to 5″ 1/2 ” band width |
| Z19 | 2-1/2″ to 5-1/2″ 1/2 ” band width |
| Z20 | 3-1/8″ to 6″ 1/2 ” band width |
| Z21 | 3-5/8″ to 6-1/2″ 1/2 ” band width |
| Z22 | 4-1/8″ to 7″ 1/2 ” band width |
| Z23 | 5-5/8″ to 8-1/2″ 9/16″ band width |
| Z24 | 7-1/8″ to 10″ 9/16″ band width |
| Z25 | 9-3/8″ to 12-1/4″ 9/16″ band width |
| Check with factory for custom sizes |
| 4 | Lead Wire Material |
|---|---|
| A |  Fiberglass (800°F) |
| B |  Fluoropolymer (400°F) |
| C |  Polyimide (500°F) |
| E |  High temperature fiberglass (1200°F) |
| F |  Fiberglass with stainless steel braid (800°F) (standard) |
| G |  Fluoropolymer with stainless steel braid (400°F) |
| H |  Fiberglass with armor cable (800°F) (standard) |
| J |  Fluoropolymer with armor cable (400°F) |
| K |  Polyimide with armor cable (500°F) |
| L |  High temperature fiberglass with armor cable (1200°F) |
| M |  Fiberglass with stainless steel braid with armor cable (800°F) |
| W |  Fluoropolymer with stainless steel braid with armor cable (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 5 | Lead Wire Length |
|---|---|
| 6-999 |
| Over 999″ contact factory |
| 6 | Junction |
|---|---|
| G |  Grounded (standard) |
| U |  Ungrounded |
| W |  Grounded (Dual Junction) |
| Y |  Ungrounded Common (Dual) |
| 7 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped leads w/ spade lugs |
| C |  Standard male plug (400°F) |
| D |  High temp male plug (660°F) |
| E |  Max temp male plug (800°F) |
| G |  Solid pin plug |
| H |  Standard female jack (400°F) |
| J |  Miniature plug (400°F) |
| K |  Miniature jack (400°F) |
| L |  2″ stripped leads w/ #6 Ring terminals |
| N |  Standard 3 pin plug w/ ground wire (400°F) |
| P |  Dual molded male plug (400°F) |
| W |  2” stripped leads w/ pin terminals |
| Q |  2” stripped leads w/ wire ferrules |
| X |  Extra long lead wire length (beyond 2” stripped leads) |
| 8 | Special Features |
|---|---|
| None | |
| 01 |  Solid conductor (Lead wire) |
| 02 |  1.5″ long strain relief spring |
| 03 |  1.5″ long heat shrink where wire exits the probe |
| 06 |  Epoxy seal |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector
|
| 11 |  International IEC 584-3 color coded leads |
| 12 |  British color coded leads |
| 13 |  German color coded leads |
| 14 |  Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 18 |  Moisture protection boot on connector |