Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Configuration |
5 Magnet Type |
6 Sheath Configuration |
7 Lead Wire Material |
8 Lead Wire Length |
9 Termination Style |
10 Special Features |
|---|---|---|---|---|---|---|---|---|---|
| RR1 | L |
| 2 | Element Type |
|---|---|
| T | 100 Ω DIN 00385 (thin film) |
| U | 500 Ω DIN 00385 (thin film) |
| W | 1000 Ω DIN 00385 (thin film) |
| X | 120 Ω Nickel DIN 00672 (thin film) |
| Y | 100 Ω DIN 003916 (wire wound) |
| Z | 500 Ω DIN 003916 (wire wound) |
| Q | 10 Ω copper (thin film) |
| 3 | Element Accuracy |
|---|---|
| A | Class A (0.06%) |
| B | Class B (0.12%) |
| 4 | Wire Configuration |
|---|---|
| 2 |  2-wire |
| 3 |  3-wire |
| 4 |  4-wire |
| 5 |  2-wire (Dual) |
| 6 |  3-wire (Dual) |
| 5 | Magnet Type |
|---|---|
| L | 25 LB pull |
| 6 | Sheath Configuration |
|---|---|
| X | Straight (standard) |
| Y | 90 degree bend |
| Z | 45 degree bend |
| 7 | Lead Wire Material |
|---|---|
| A |  Fiberglass (800°F) |
| B |  Fluoropolymer (400°F) |
| C |  Fiberglass with stainless steel braid (800°F) |
| D |  Fluoropolymer with stainless steel braid (400°F) |
| E |  Fiberglass with armor cable (800°F) |
| F |  Fluoropolymer with armor cable (400°F) |
| Options C & D require a transition fitting for thread size options F, H & M (transition fitting 3/16″ OD X 1″ long) |
| 8 | Lead Wire Length |
|---|---|
| 6-999 |
| Over 999″ contact factory |
| 9 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped w/ #8 spade lugs |
| C |  Standard male 2-pin plug (400°F) |
| D |  Standard male 3-pin plug (400°F) |
| F |  Standard 2-pin female jack (400°F) |
| G |  Standard 3-pin female jack (400°F) |
| H |  Miniature male 2-pin plug (400°F) |
| P |  Miniature male 3-pin plug (400°F) |
| J |  Miniature female 2-pin jack (400°F) |
| K |  Miniature female 3-pin jack (400°F) |
| R |  Dual molded male 4-pin plug (400°F) (for dual 2 wire) |
| T |  Dual molded female 4-hole jack (400°F) (for dual 2 wire) |
| W |  2″ stripped leads w/ pin terminals |
| Q |  2″ stripped leads w/ wire ferrules |
| X |  Extra long lead wire length (beyond 2” stripped leads) |
| 10 | Special Features |
|---|---|
| None | |
| 02 |  1.5″ long strain relief spring |
| 03 |  1.5″ long heat shrink where wire exits the probe |
| 06 |  Epoxy seal |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector |
- 24 AWG stranded wire comes standard on magnetic RTDs
- Standard magnet has 26 lb pull
- Flat tip ensures good surface contact
- For other configurations contact factory