Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Calibration |
3 Magnet Type |
4 Bend Type |
5 Junction |
6 Lead Wire Material |
7 Lead Wire Length |
8 Termination Style |
9 Special Features |
|---|---|---|---|---|---|---|---|---|
| TJ1 | L |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Magnet Type |
|---|---|
| L | 25 LB pull |
| 4 | Bend Type |
|---|---|
| X |  Straight (standard) |
| Y |  90 Degree bend |
| Z |  45 Degree bend |
| 5 | Junction |
|---|---|
| G |  Grounded (standard) |
| U |  Ungrounded |
| W |  Grounded (Dual Junction) |
| Y |  Ungrounded Common (Dual) |
| 6 | Lead Wire Material |
|---|---|
| A |  Fiberglass (800°F) |
| B |  Fluoropolymer (400°F) |
| C |  Polyimide (500°F) |
| F |  Fiberglass with stainless steel braid (800°F) (standard) |
| G |  Fluoropolymer with stainless steel braid (400°F) |
| H |  Fiberglass with armor cable (800°F) (standard) |
| J |  Fluoropolymer with armor cable (400°F) |
| K |  Polyimide with armor cable (500°F) |
| W |  Fluoropolymer with stainless steel braid with armor cable (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 7 | Lead Wire Length |
|---|---|
| 16-999 |
| Over 999″ contact factory |
| 8 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped leads w/ spade lugs |
| C |  Standard male plug (400°F) |
| D |  High temp male plug (660°F) |
| E |  Max temp male plug (800°F) |
| G |  Solid pin plug |
| H |  Standard female jack (400°F) |
| J |  Miniature plug (400°F) |
| N |  Standard 3 pin plug w/ ground wire (400°F) |
| P |  Dual molded male plug (400°F) |
| W |  2” stripped leads w/ pin terminals |
| Q |  2” stripped leads w/ wire ferrules |
| X |  Extra long lead wire length (beyond 2” stripped leads) |
| 9 | Special Features |
|---|---|
| None | |
| 01 |  Solid conductor (Lead wire) |
| 02 |  1.5″ long strain relief spring |
| 03 |  1.5″ long heat shrink where wire exits the probe |
| 06 |  Epoxy seal |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector
|
| 11 |  International IEC 584-3 color coded leads |
| 12 |  British color coded leads |
| 13 |  German color coded leads |
| 14 |  Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 18 |  Moisture protection boot on connector |
- 20 AWG stranded wire comes standard on magnetic thermocouples
- Standard magnet has 26 lb pull
- For other configurations contact factory
- Thermocouple is spring loaded and has a flat tip to ensure good surface measurement