Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
| 1 Series |
2 Melt Bolt Style |
3 Melt Bolt Length |
4 Calibration |
5 Tip Diameter |
6 Tip Length |
7 Tip Material |
8 Junction |
9 Armor Cable Length |
10 Termination Style |
11 Special Features |
|---|---|---|---|---|---|---|---|---|---|---|
| TK1 |
| 2 | Melt Bolt Style |
|---|---|
| A | Style 1 |
| B | Style 2 |
| 3 | Melt Bolt Length |
|---|---|
| 03 | 3″ |
| 04 | 4″ |
| 06 | 6″ |
| 07 | 7″ |
| 09 | 9″ |
| 12 | 12″ |
| 14 | 14″ |
| 4 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| W | Type J (Special limits) |
| X | Type K (Special limits) |
| Y | Type T (Special limits) |
| Z | Type E (Special limits) |
| 5 | Tip Diameter |
|---|---|
| H | 0.125″ OD (standard) |
| L | 0.188″ OD |
| N | 0.250″ |
| For flush tip use code “H” |
| 6 | Tip Length |
|---|---|
| T | Flush |
| H | 1/8″ |
| U | 1/4″ |
| B | 3/8″ (standard) |
| W | 1/2″ |
| X | 5/8″ |
| Y | 3/4″ |
| Z | 1″ |
| P | 1-1/8″ |
| Q | 1-1/4″ |
| 7 | Tip Material |
|---|---|
| F | 304 SS (standard) |
| H | 316 SS |
| M | Inconel (600) |
| N | 446 SS |
| P | 310 SS |
| Q | Hastaloy |
| R | Pyrosil D |
| 8 | Junction |
|---|---|
| G |  Grounded (standard) |
| U |  Ungrounded |
| E |  Exposed |
| W |  Grounded (Dual Junction) |
| X |  Ungrounded & isolated (Dual Junction) |
| Y |  Ungrounded common (Dual Junction) |
| Z |  Expose & isolated (Dual Junction) |
| 9 | Armor Cable Length |
|---|---|
| X | No flex armor (style 2 only) |
| F | 4″ (standard) (style 1 only) |
| 2-600 |
| (style 1 only) | |
| over 600″contact factory |
| 10 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| C |  Standard male plug (400°F) |
| D |  High temp male plug (660°F) |
| E |  Max temp male plug (800°F) |
| G |  Solid pin plug |
| H |  Standard female jack (400°F) |
| N |  Standard 3 pin plug w/ ground wire (400°F) |
| P |  Dual molded male plug (400°F) |
| Z |  Dual molded female jack (400°F) |
| 11 | Special Features |
|---|---|
| None | |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector
|
| 18 |  Moisture protection boot on connector |
| 23 |  304SS tag with part # emgraved |