Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Material |
5 6 Sheath Length |
7 Junction |
8 Head Mounting Fitting |
9 Lead Wire Material |
10 Lead Wire Length |
11 Special Features |
|---|---|---|---|---|---|---|---|---|---|
| TN2 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| W | Type J (Special limits) |
| X | Type K (Special limits) |
| Y | Type T (Special limits) |
| Z | Type E (Special limits) |
| 3 | Sheath Diameter |
|---|---|
| H | 0.125″ (3.2mm) (1/8″) |
| L | 0.188″ (4.8mm) (3/16″) |
| N | 0.250″ (6.4mm) (1/4″) |
| Q | 0.375″ (9.5mm) (3/8″) |
| 4 | Sheath Material |
|---|---|
| F | 304 SS |
| H | 316 SS |
| M | INCONEL (600) |
| N | 446 SS |
| P | 310 SS |
| 5 6 | Sheath Length |
|---|---|
| ¼-600 |
| 7 | Junction |
|---|---|
| G |  Grounded (Single) |
| U |  Ungrounded (Single) |
| E |  Exposed (Single) |
| R |  Expose & recessed (Single) |
| W |  Grounded (Dual) |
| X |  Ungrounded & isolated (Dual) |
| Y |  Ungrounded common (Dual) |
| Z |  Expose & isolated (Dual) |
| Ungrounded and isolated only available in 0.156″ OD & larger |
| 8 | Head Mounting Fitting |
|---|---|
| 06 |  1/2” npt x 1/2″ npt double thread |
| 07 |  1/2” npt double thread spring loaded |
| 08 |  1/2” npt x 1/2″ npt double threadspring loaded w/ oil seal |
| 09 |  1/2” npt x 3/4″ npt double thread |
| 10 |  3/4” npt x 3/4″ npt double thread |
| 12 |  Single threaded brass compression (no process thread) |
| 13 |  Single threaded stainless compression (no process thread) |
| 14 |  1/2” npt x 1″ npt double thread |
| For other fittings not shown contact factory |
| 9 | Lead Wire Material |
|---|---|
| A |  Fiberglass (800°F) |
| B |  Fluoropolymer (400°F) |
| C |  Polyimide (500°F) |
| D |  PVC (220°F) |
| E |  High temperature fiberglass (1200°F) |
| F |  Fiberglass with stainless steel braid (800°F) |
| G |  Fluoropolymer with stainless steel braid (400°F) |
| H |  Fiberglass with armor cable (800°F) |
| J |  Fluoropolymer with armor cable (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 10 | Lead Wire Length |
|---|---|
| 6-999 |
| Over 999″ contact factory |
| 11 | Special Features |
|---|---|
| None | |
| 47 |  Stranded conductor (Lead wire) |
| 03 |  1.5″ long heat shrink where wire exits the probe |
| 04 |  Flat tip probe |
| 05 |  Drill point tip |
| 06 |  Epoxy seal |
| 24 |  Fluoropolymer covered probe |