Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Element Type |
3 Wire Config |
4 Sheath Diameter |
5 Transition Fitting |
6 7 Sheath Length |
8 Lead Wire Material |
9 Lead Wire Length |
10 Termination Style |
11 Special Features |
12 Attached Fitting |
13 14 Insertion Length |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RB5 |
| 2 | Element Type |
|---|---|
| K | 100 Ω DIN 00385 Class A mineral insulated element (500°C rated) |
| P | 100 Ω DIN 00385 mineral insulated element (800°C rated) |
| For other elements consult factory |
| 3 | Wire Configuration |
|---|---|
| 2 |  2-wire |
| 3 |  3-wire |
| 4 |  4-wire |
| 5 |  2-wire (Dual) |
| 6 |  3-wire (Dual) |
| 4 | Sheath Diameter |
|---|---|
| D | 0.062” (1.6mm) (1/16″) |
| H | 0.125” (3.2mm) (1/8″) |
| L | 0.188” (4.8mm) (3/16″) |
| N | 0.250” (6.4mm) (1/4″) |
| Sizes for reference only (Standard tolerances apply) | |
| For other diameters consult factory |
| 5 | Transition Fitting |
|---|---|
| 1 | 3/8”OD X 1.25” w/ spring (standard) |
| 2 | 1/4”OD X 1.25” w/ spring |
| 4 | 3/8”OD X 1.25” (no spring) |
| 5 | 1/4”OD X 1.25” (no spring) |
| 500°F epoxy standard |
| 6 7 | Sheath Length |
|---|---|
| 2-60 |
| 8 | Lead Wire Material |
|---|---|
| A |  Fiberglass (800°F) |
| B |  Fluoropolymer (400°F) |
| C |  Fiberglass with stainless steel braid (800°F) (standard) |
| D |  Fluoropolymer with stainless steel braid (400°F) |
| E |  Fiberglass with armor cable (800°F) (standard) |
| F |  Fluoropolymer with armor cable (400°F) |
| G |  Fiberglass with stainless steel braid with armor cable (800°F) |
| H |  Fluoropolymer with stainless steel braid with armor cable (400°F) |
| J |  Fluoropolymer singles (without white outer jacket) (400°F) |
| 9 | Lead Wire Length |
|---|---|
| 6-999 |
| Over 999″ contact factory |
| 10 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped w/ #8 spade lugs |
| C |  Standard male 2-pin plug (400°F) |
| D |  Standard male 3-pin plug (400°F) |
| F |  Standard 2-pin female jack (400°F) |
| G |  Standard 3-pin female jack (400°F) |
| H |  Miniature male 2-pin plug (400°F) |
| P |  Miniature male 3-pin plug (400°F) |
| J |  Miniature female 2-pin jack (400°F) |
| K |  Miniature female 3-pin jack (400°F) |
| L |  2″ stripped leads w/#6 ring terminals |
| R |  Dual molded male 4-pin plug (400°F) (for dual 2 wire) |
| T |  Dual molded female 4-hole jack (400°F) (for dual 2 wire) |
| W |  2″ stripped leads w/ pin terminals |
| Q |  2″ stripped leads w/ wire ferrules |
| X |  Extra long lead wire length (beyond 2” stripped leads) |
| 11 | Special Features |
|---|---|
| None | |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector |
| 10 |  Armor cable adaptor |
| 18 |  Moisture protection boot on connector |
| 21 |  Fluoropolymer coated armor cable |
| 24 |  Fluoropolymer covered probe |
| 36 |  RTD color code White-White-Red (Fluoropolymer) |
| 37 |  RTD color code Black-White-Red (Fluoropolymer) |
| 38 |  RTD color code Blue-Orange-White (Fluoropolymer) |
| 12 | Attached Fitting (optional) |
|---|---|
| None | |
| F01 |  1/8″ npt single thread |
| F02 |  1/4″ npt single thread |
| F03 |  3/8″ npt single thread |
| F04 |  1/2″ npt single thread |
| F05 |  3/4″ npt single thread |
| F06 |  1/2″ npt x 1/2″ npt double thread |
| F07 |  1/2″ npt double thread. Spring loaded |
| F08 |  1/2″ npt x 1/2″ npt double thread. Spring loaded w/ oil seal |
| F09 |  1/2″ npt x 3/4″ npt double thread |
| F10 |  3/4″ npt x 3/4″ npt double thread |
| F16 |  Adjustable 7/16″ ID bayonet cap fitting (1/8″ OD & 3mm OD) |
| F17 |  Adjustable 12.5mm ID double slot bayonet cap fitting (1/8″ OD & 3mm OD) |
| F18 |  1/8″ npt compression fitting (Brass) |
| F19 |  1/8″ npt compression fitting (Stainless Steel) |
| F20 |  1/4″ npt compression fitting (Brass) |
| F21 |  1/4″ npt compression fitting (Stainless Steel) |
| F22 |  1/2″ npt compression fitting (Brass) |
| F23 |  1/2″ npt compression fitting (Stainless Steel) |
| For other fittings not shown contact factory |