Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Material |
5 6 Sheath Length |
7 Junction |
8 Transition Fitting |
9 Coil Cord Style |
10 Termination Style |
11 Special Features |
|---|---|---|---|---|---|---|---|---|---|
| TW1 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| W | Type J (Special limits) |
| X | Type K (Special limits) |
| Y | Type T (Special limits) |
| Z | Type E (Special limits) |
| 3 | Sheath Diameter |
|---|---|
| D | 0.062″ (1.6mm)(1/16″) |
| E | 0.079″ (2mm) |
| F | 0.092″ (2.3mm) |
| G | 0.118″ (3mm) |
| H | 0.125″ (3.2mm) (1/8″) |
| J | 0.156″ (4mm) |
| K | 0.177″ (4.5mm) |
| L | 0.188″ (4.8mm) (3/16″) (standard) |
| M | 0.236″ (6mm) |
| N | 0.250″ (6.4mm) (1/4″) |
| Sizes for reference only (Standard tolerances apply) | |
| For other diameters consult factory |
| 4 | Sheath Material |
|---|---|
| F | 304 SS |
| H | 316 SS |
| M | INCONEL (600) |
| N | 446 SS |
| P | 310 SS |
| Q | Hastelloy |
| R | Pyrosil D |
| 5 6 | Sheath Length |
|---|---|
| ¼-600 |
| 7 | Junction |
|---|---|
| G |  Grounded (Single) |
| U |  Ungrounded (Single) |
| E |  Exposed (Single) |
| R |  Expose & recessed (Single) |
| 8 | Transition Fitting |
|---|---|
| 1 |  3/8”OD X 1.25” w/ strain relief spring |
| 2 |  1/4”OD X 1.25” w/ strain relief spring |
| 4 |  3/8”OD X 1.25” (no spring) |
| 5 |  1/4”OD X 1.25” (no spring) |
| 500°F epoxy standard |
| 9 | Coil Cord Style |
|---|---|
| N | 10″ coil cord (extends to approx. 6ft) (220°F) |
| P | 24″ coil cord (extends to approx. 14ft) (220°F) |
| 10 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped leads w/ spade lugs |
| C |  Standard male plug (400°F) |
| G |  Solid pin plug |
| H |  Standard female jack (400°F) |
| J |  Miniature plug (400°F) |
| K |  Miniature jack (400°F) |
| L |  2″ stripped leads w/ #6 Ring terminals |
| W |  2” stripped leads w/ pin terminals |
| Q |  2” stripped leads w/ wire ferrules |
| 11 | Special Features |
|---|---|
| None | |
| 05 |  Drill point tip |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector
|
| 18 |  Moisture protection boot on connector |
| 24 |  Fluoropolymer covered probe |