Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Material |
5 6 Sheath Length |
7 Junction |
8 Transition Fitting |
9 Lead Wire Material |
10 Lead Wire Length |
11 Termination Style |
12 Special Features |
13 Attached Fitting |
14 15 Insertion Length |
---|---|---|---|---|---|---|---|---|---|---|---|---|
TL1 |
2 | Calibration |
---|---|
J | Type J |
K | Type K |
T | Type T |
E | Type E |
W | Type J (Special limits) |
X | Type K (Special limits) |
Y | Type T (Special limits) |
Z | Type E (Special limits) |
3 | Sheath Diameter |
---|---|
A | 0.032″ (0.8mm) |
B | 0.040″ (1mm) |
C | 0.059″ (1.5mm) |
D | 0.062″ (1.6mm)(1/16″) |
E | 0.079″ (2mm) |
F | 0.092″ (2.3mm) |
G | 0.118″ (3mm) |
H | 0.125″ (3.2mm) (1/8″) |
J | 0.156″ (4mm) |
K | 0.177″ (4.5mm) |
L | 0.188″ (4.8mm) (3/16″) (standard) |
M | 0.236″ (6mm) |
N | 0.250″ (6.4mm) (1/4″) |
P | 0.314″ (8mm) (5/16″) |
Q | 0.375″ (9.5mm) (3/8″) |
Sizes for reference only (Standard tolerances apply) | |
For other diameters consult factory |
4 | Sheath Material |
---|---|
F | 304 SS |
H | 316 SS |
M | INCONEL (600) |
N | 446 SS |
P | 310 SS |
Q | Hastelloy |
R | Pyrosil D |
5 6 | Sheath Length |
---|---|
¼-600 |
7 | Junction |
---|---|
G | Grounded (Single) |
U | Ungrounded (Single) |
E | Exposed (Single) |
R | Expose & recessed (Single) |
W | Grounded (Dual) |
X | Ungrounded & isolated (Dual) |
Y | Ungrounded common (Dual) |
Z | Expose & isolated (Dual) |
Ungrounded and isolated only available in 0.156″ OD & larger |
8 | Transition Fitting |
---|---|
1 | 3/8”OD X 1.25” w/ strain relief spring |
2 | 1/4”OD X 1.25” w/ strain relief spring |
3 | 3/16”OD X 1” w/ strain relief spring |
4 | 3/8”OD X 1.25” (no spring) |
5 | 1/4”OD X 1.25” (no spring) |
6 | 3/16”OD X 1” (no spring) |
7 | 7/16”OD X 2” (no spring) |
8 | 3/8”OD X 2” (no spring) |
500°F epoxy standard | |
See special features for ceramic potting |
9 | Lead Wire Material |
---|---|
A | Fiberglass (800°F) |
B | Fluoropolymer (400°F) |
C | Polyimide (500°F) |
D | PVC (220°F) |
E | High temperature fiberglass (1200°F) |
F | Fiberglass with stainless steel braid (800°F) |
G | Fluoropolymer with stainless steel braid (400°F) |
H | Fiberglass with armor cable (800°F) |
J | Fluoropolymer with armor cable (400°F) |
K | Polyimide with armor cable (500°F) |
L | High temperature fiberglass with armor cable (1200°F) |
M | Fiberglass with stainless steel braid with armor cable (800°F) |
W | Fluoropolymer with stainless steel braid with armor cable (400°F) |
X | High temp fiberglass with ss steel braid (1200°F) |
Wire gauge determined by ECS based on sheath diameter |
10 | Lead Wire Length |
---|---|
6-999 |
Over 999″ contact factory |
11 | Termination Style |
---|---|
A | 2″ stripped leads (bare ends) |
B | 2″ stripped leads w/ spade lugs |
C | Standard male plug (400°F) |
D | High temp male plug (660°F) |
E | Max temp male plug (800°F) |
F | Ceramic male plug (1200°F) |
G | Solid pin plug |
H | Standard female jack (400°F) |
J | Miniature plug (400°F) |
K | Miniature jack (400°F) |
L | 2″ stripped leads w/ #6 Ring terminals |
N | Standard 3 pin plug w/ ground wire (400°F) |
P | Dual molded male plug (400°F) |
W | 2” stripped leads w/ pin terminals |
Q | 2” stripped leads w/ wire ferrules |
X | Extra long lead wire length (beyond 2” stripped leads) |
12 | Special Features |
---|---|
None | |
47 | Stranded conductor (Lead wire) |
04 | Flat tip probe |
07 | Cable Clamp |
08 | Bx Connector |
09 | Mating connector |
10 | Armor cable adapter |
11 | International IEC 584-3 color coded leads |
12 | British color coded leads |
13 | German color coded leads |
14 | Japanese color coded leads |
15 | Reverse polarity color coded leads |
16 | French color coded leads |
18 | Moisture protection boot on connector |
19 | High temperature ceramic potting (1200°F) |
21 | Fluoropolymer coated armor cable (Fluoropolymer) |
24 | Fluoropolymer covered probe |
25 | Free spinning fitting (held on probe by a crimp ring) |
28 | 90 degree bend |
30 | 45 degree bend |
13 | Attached Fitting (optional) |
---|---|
None | |
F01 | 1/8″ npt single thread |
F02 | 1/4″ npt single thread |
F03 | 3/8″ npt single thread |
F04 | 1/2″ npt single thread |
F05 | 3/4″ npt single thread |
F06 | 1/2″ npt x 1/2″ npt double thread |
F07 | 1/2″ npt double thread. Spring loaded |
F08 | 1/2″ npt x 1/2″ npt double thread. Spring loaded w/ oil seal |
F09 | 1/2″ npt x 3/4″ npt double thread |
F10 | 3/4″ npt x 3/4″ npt double thread |
F11 | Fixed bayonet cap assembly |
F14 | 1/2″ npt x 1″ npt double thread |
F15 | 1″ npt single thread |
F16 | Adjustable 7/16″ ID bayonet cap fitting (1/8″ OD & 3mm OD) |
F17 | Adjustable 12.5mm ID double slot bayonet cap fitting (1/8″ OD & 3mm OD) |
F18 | 1/8″ npt compression fitting (Brass) |
F19 | 1/8″ npt compression fitting (Stainless Steel) |
F20 | 1/4″ npt compression fitting (Brass) |
F21 | 1/4″ npt compression fitting (Stainless Steel) |
F22 | 1/2″ npt compression fitting (Brass) |
F23 | 1/2″ npt compression fitting (Stainless Steel) |
F28 | 1″ circular mounting flange |
For other fittings not shown contact factory |
14 15 | Insertion Length (when required) |
---|---|
None | |
0-600 |
- Solid wire is standard on MGO extension thermocouples
- For stranded wire see special features