Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Length |
5 Junction |
6 Lead Wire Material |
7 Lead Wire Length |
8 Cap/Spring Style |
9 Termination Style |
10 Special Features |
|---|---|---|---|---|---|---|---|---|---|
| TA6 | H |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Sheath Diameter |
|---|---|
| H | 0.125″ (3.2mm) (1/8″) |
| Sizes for reference only (Standard tolerances apply) |
| 4 | Sheath Length |
|---|---|
| R | 1/4″ |
| S | 3/8″ (Standard) |
| W | 1/2″ |
| X | 5/8″ |
| Y | 3/4″ |
| Z | 1″ |
| 5 | Junction |
|---|---|
| G |  Grounded (standard) |
| U |  Ungrounded |
| 6 | Lead Wire Material |
|---|---|
| A |  Fiberglass (800°F) |
| B |  Fluoropolymer (400°F) |
| C |  Polyimide (500°F) |
| F |  Fiberglass with stainless steel braid (800°F) (standard) |
| Wire gauge based on sheath diameter |
| 7 | Lead Wire Length |
|---|---|
| 12-999 |
| Over 999″ contact factory |
| 8 | Cap/Spring Style |
|---|---|
| Z | 7/16″ ID single J slot (standard cap)/ 3/16″OD x 10″ spring |
| X | 7/16″ ID single J slot (standard cap)/ 3/16″OD x 6″ spring |
| 9 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped leads w/ spade lugs |
| C |  Standard male plug (400°F) |
| D |  High temp male plug (660°F) |
| E |  Max temp male plug (800°F) |
| G |  Solid pin plug |
| H |  Standard female jack (400°F) |
| J |  Miniature plug (400°F) |
| K |  Miniature jack (400°F) |
| L |  2″ stripped leads w/ #6 Ring terminals |
| N |  Standard 3 pin plug w/ ground wire (400°F) |
| W |  2″ stripped leads w/ wire ferrules (pin terminals) |
| Q |  2” stripped leads w/ wire ferrules |
| X |  Extra long lead wire length (beyond 2” stripped leads) |
| 10 | Special Features |
|---|---|
| None | |
| 01 |  Solid conductor (Lead wire) |
| 04 |  Flat tip probe |
| 05 |  Drill point tip |
| 06 |  Epoxy seal |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector
|
| 11 |  International IEC 584-3 color coded leads |
| 12 |  British color coded leads |
| 13 |  German color coded leads |
| 14 |  Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 16 |  French color coded leads |
| 18 |  Moisture protection boot on connector |
| 20 |  Add ground wire to TC & RTD |
| 29 |  Silver solder thermocouple junction |
- Miniature adjustable spring style thermocouples fit in 0..250″ hole. Cap spins over entire length of spring
- 24 AWG stranded wire comes standard for 0.125″ and 0.118″