Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Cali- bration |
3 Sheath Diameter |
4 Sheath Length |
5 Junction |
6 Lead Wire Material |
7 Lead Wire Length |
8 Cap/Spring Style |
9 Epoxy Sealed Probe |
10 Termination Style |
11 Special Features |
|---|---|---|---|---|---|---|---|---|---|---|
| TA5 | J | L | S | X |
| 2 | Calibration |
|---|---|
| J | Type J |
| 3 | Sheath Diameter |
|---|---|
| L | 0.188″ (4.8mm) (3/16″) (standard) |
| 4 | Sheath Length |
|---|---|
| R | 1/4″ |
| S | 3/8″ (Standard) |
| W | 1/2″ |
| X | 5/8″ |
| Y | 3/4″ |
| Z | 1″ |
| H | 1.25″ |
| P | 1.5″ |
| Q | 1.75″ |
| T | 2″ |
| 5 | Junction |
|---|---|
| G |  Grounded (standard) |
| U |  Ungrounded |
| 6 | Lead Wire Material |
|---|---|
| S |  Clear Fluoropolymer coated fiberglass w/ stainless steel braid |
| 7 | Lead Wire Length |
|---|---|
| 12-999 |
| Over 999″ contact factory |
| 8 | Cap/Spring Style |
|---|---|
| P | 7/16″ ID single slot (standard cap)/1/4″ OD x 10″ spring |
| Q | 12.5mm ID double slot / 1/4″OD x 10″ spring |
| R | 14.7 ID double slot / 1/4″OD x 10″ spring |
| S | 7/16″ ID single slot (standard cap)/1/4″OD x 6″ spring |
| T | 12.5mm ID double slot / 1/4″OD x 6″ spring |
| W | 14.7 ID double slot / 1/4″OD x 6″ spring |
| 9 | Epoxy Sealed Probe |
|---|---|
| X | 500°F rated epoxy seal |
| 10 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped leads w/ spade lugs |
| C |  Standard male plug (400°F) |
| G |  Solid pin plug |
| H |  Standard female jack (400°F) |
| J |  Miniature plug (400°F) |
| K |  Miniature jack (400°F) |
| L |  2″ stripped leads w/ #6 Ring terminals |
| W |  2″ stripped leads w/ wire ferrules (pin terminals) |
| Q |  2” stripped leads w/ wire ferrules |
| X |  Extra long lead wire length (beyond 2” stripped leads) |
| 11 | Special Features |
|---|---|
| None | |
| 04 |  Flat tip probe |
| 05 |  Drill point tip |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector
|
| 11 |  International IEC 584-3 color coded leads |
| 12 |  British color coded leads |
| 13 |  German color coded leads |
| 14 |  Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 16 |  French color coded leads |
| 18 |  Moisture protection boot on connector |
- Epoxy sealed probe & Fluoropolymer voated lead wire add moisture resistance
- Adjustable spring style thermocouples fit a wide variety of hole depths
- Cap spins over entire length of spring
- 20 awg standard wire