Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
1 Series |
2 Calibration |
3 Sheath Diameter |
4 Sheath Material |
5 6 Sheath Length |
7 Junction |
8 Transition Fitting |
9 Lead Wire Material |
10 Lead Wire Length |
11 Termination Style |
12 Points |
---|---|---|---|---|---|---|---|---|---|---|
TMP1 | X |
2 | Calibration |
---|---|
J | Type J |
K | Type K |
W | Type J (Special limits) |
X | Type K (Special limits) |
3 | Sheath Diameter |
---|---|
H | 0.125″ (3.2mm) (1/8″) |
L | 0.188″ (4.8mm) (3/16″) (standard) |
N | 0.250″ (6.4mm) (1/4″) |
Sizes for reference only (Standard tolerances apply) | |
For other diameters consult factory |
4 | Sheath Material |
---|---|
F | 304 SS |
H | 316 SS |
M | INCONEL (600) |
5 6 | Sheath Length |
---|---|
¼-600 |
7 | Junction |
---|---|
G | Grounded (Single) |
U | Ungrounded (Single) |
8 | Transition Fitting |
---|---|
X | 18mm OD X 5” long |
9 | Lead Wire Material |
---|---|
A | Fiberglass (800°F) |
B | Fluoropolymer (400°F) |
C | Polyimide (500°F) |
Wire gauge determined by ECS based on sheath diameter |
10 | Lead Wire Length |
---|---|
6-300 |
Over 300″ contact factory |
11 | Termination Style |
---|---|
A | 2″ stripped leads (bare ends) |
B | 2″ stripped leads w/ spade lugs |
C | Standard male plug (400°F) |
G | Solid pin plug (400°F) |
H | Standard female jack (400°F) |
J | Miniature plug (400°F) |
K | Miniature jack (400°F) |
W | 2” stripped leads w/ pin terminals |
Q | 2” stripped leads w/ wire ferrules |