Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Configuration |
5 Sheath Diameter |
6 Sheath Configuration |
7 8 Sheath Length |
9 Termination Style |
10 Special Features |
11 Attached Fitting |
12 13 Insertion Length |
|---|---|---|---|---|---|---|---|---|---|---|
| RB3 |
| 2 | Element Type |
|---|---|
| T | 100 Ω DIN 00385 (thin film) |
| U | 500 Ω DIN 00385 (thin film) |
| W | 1000 Ω DIN 00385 (thin film) |
| X | 120 Ω Nickel DIN 00672 (thin film) |
| Y | 100 Ω DIN 003916 (wire wound) |
| Z | 500 Ω DIN 003916 (wire wound) |
| Q | 10 Ω copper (thin film) |
| 3 | Element Accuracy |
|---|---|
| A | Class A (0.06%) |
| B | Class B (0.12%) |
| 4 | Wire Configuration |
|---|---|
| 2 |  2-wire |
| 3 |  3-wire |
| 4 |  4-wire |
| 5 |  2-wire (Dual) |
| 6 |  3-wire (Dual) |
| 5 | Sheath Diameter |
|---|---|
| G | 0.118” (3mm) |
| H | 0.125” (3.2mm) (1/8″) |
| J | 0.156” (4mm) |
| L | 0.188” (4.8mm) (3/16″) |
| M | 0.236” (6mm) |
| N | 0.250” (6.4mm) (1/4″) |
| Sizes for reference only (Standard tolerances apply) | |
| For other diameters consult factory |
| 6 | Sheath Configuration |
|---|---|
| X |  Straight (standard) |
| Y |  90 Degree bend |
| Z |  45 Degree bend |
| 7 8 | Sheath Length |
|---|---|
| 6-60 |
| 9 | Termination Style |
|---|---|
| C |  Standard male 2-pin plug (400°F) |
| D |  Standard male 3-pin plug (400°F) |
| F |  Standard 2-pin female jack (400°F) |
| G |  Standard 3-pin female jack (400°F) |
| H |  Miniature male 2-pin plug (400°F) |
| P |  Miniature male 3-pin plug (400°F) |
| J |  Miniature female 2-pin jack (400°F) |
| K |  Miniature female 3-pin jack (400°F) |
| R |  Dual molded male 4-pin plug (400°F) (for dual 2 wire) |
| T |  Dual molded female 4-hole jack (400°F) (for dual 2 wire) |
| 10 | Special Features |
|---|---|
| None | |
| 04 |  Flat tip probe |
| 05 |  Drill point tip |
| 09 |  Mating connector |
| 18 |  Moisture protection boot on connector |
| 24 |  Fluoropolymer covered probe |
| 25 |  Free spinning fitting (held on probe by a crimp ring) |
| 26 |  Connector mounted with tube adapter |
| 11 | Attached Fitting (optional) |
|---|---|
| None | |
| F01 |  1/8″ npt single thread |
| F02 |  1/4″ npt single thread |
| F03 |  3/8″ npt single thread |
| F04 |  1/2″ npt single thread |
| F05 |  3/4″ npt single thread |
| F06 |  1/2″ npt x 1/2″ npt double thread |
| F07 |  1/2″ npt double thread. Spring loaded |
| F08 |  1/2″ npt x 1/2″ npt double thread. Spring loaded w/ oil seal |
| F09 |  1/2″ npt x 3/4″ npt double thread |
| F10 |  3/4″ npt x 3/4″ npt double thread |
| F11 |  Fixed 7/16″ ID bayonet cap assembly (on MGO probe) (1/8″ OD, 3mm OD & 3/16″ OD) |
| F15 |  1″ npt single thread |
| F16 |  Adjustable 7/16″ ID bayonet cap fitting (1/8″ OD & 3mm OD) |
| F17 |  Adjustable 12.5mm ID double slot bayonet cap fitting (1/8″ OD & 3mm OD) |
| F18 |  1/8″ npt compression fitting (Brass) |
| F19 |  1/8″ npt compression fitting (Stainless Steel) |
| F20 |  1/4″ npt compression fitting (Brass) |
| F21 |  1/4″ npt compression fitting (Stainless Steel) |
| For other fittings not shown contact factory |
| 12 13 | Insertion Length (when required) |
|---|---|
| None | |
| 0-144 |
- 24 AWG stranded fiberdlass wire inside (700°F) max
- For other configurations contact factory
- Single lead (white) is on the (- pin) for 3-wire RTD connections