Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Specifications| 1 Series |
2 Calibration |
3 Ring Terminal Size |
4 Junction |
5 Lead Wire Material |
6 Lead Wire Length |
7 Termination Style |
8 Special Features |
|---|---|---|---|---|---|---|---|
| TC1 |
| 2 | Calibration |
|---|---|
| J | Type J |
| K | Type K |
| T | Type T |
| E | Type E |
| 3 | Ring Terminal Size |
|---|---|
| F | #6 (0.147” hole size) |
| H | #8 (0.173” hole size) |
| M | #10 (0.198” hole size) |
| N | 1/4” (0.263” hole size) |
| P | 5/16” (0.336” hole size) |
| Q | 3/8” (0.393” hole size) |
| W | 1/2” (0.515” hole size) |
| 4 | Junction |
|---|---|
| G |  Grounded (standard) |
| U |  Ungrounded |
| W |  Grounded (Dual Junction) |
| Y |  Ungrounded Common (Dual) |
| 5 | Lead Wire Material |
|---|---|
| A |  Fiberglass (800°F) |
| B |  Fluoropolymer (400°F) |
| C |  Polyimide (500°F) |
| E |  High temperature fiberglass (1200°F) |
| F |  Fiberglass with stainless steel braid (800°F) (standard) |
| G |  Fluoropolymer with stainless steel braid (400°F) |
| H |  Fiberglass with armor cable (800°F) (standard) |
| J |  Fluoropolymer with armor cable (400°F) |
| K |  Polyimide with armor cable (500°F) |
| L |  High temperature fiberglass with armor cable (1200°F) |
| M |  Fiberglass with stainless steel braid with armor cable (800°F) |
| W |  Fluoropolymer with stainless steel braid with armor cable (400°F) |
| Wire gauge determined by ECS based on sheath diameter |
| 6 | Lead Wire Length |
|---|---|
| 6-999 |
| Over 999″ contact factory |
| 7 | Termination Style |
|---|---|
| A |  2″ stripped leads (bare ends) |
| B |  2″ stripped leads w/ spade lugs |
| C |  Standard male plug (400°F) |
| D |  High temp male plug (660°F) |
| E |  Max temp male plug (800°F) |
| G |  Solid pin plug |
| H |  Standard female jack (400°F) |
| J |  Miniature plug (400°F) |
| K |  Miniature jack (400°F) |
| L |  2″ stripped leads w/ #6 Ring terminals |
| N |  Standard 3 pin plug w/ ground wire (400°F) |
| P |  Dual molded male plug (400°F) |
| W |  2” stripped leads w/ pin terminals |
| Q |  2” stripped leads w/ wire ferrules |
| X |  Extra long lead wire length (beyond 2” stripped leads) |
| 8 | Special Features |
|---|---|
| None | |
| 01 |  Solid conductor (Lead wire) |
| 02 |  1.5″ long strain relief spring |
| 03 |  1.5″ long heat shrink where wire exits the probe |
| 06 |  Epoxy seal |
| 07 |  Cable Clamp |
| 08 |  Bx Connector |
| 09 |  Mating connector
|
| 11 |  International IEC 584-3 color coded leads |
| 12 |  British color coded leads |
| 13 |  German color coded leads |
| 14 |  Japanese color coded leads |
| 15 | Reverse polarity color coded leads |
| 16 |  French color coded leads |
| 18 |  Moisture protection boot on connector |
| 50 | 1200°F rated ring terminal |
- Ring terminal can be mounted under various different screw sizes to sense temperature of a surface
- This style offer a strain relief sleeve to prevent excess wearing where the lead wire exits the neck of the ring terminal, improving longevity