Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
1 Series |
2 Element Type |
3 Element Accuracy |
4 Wire Configuration |
5 Insertion Length |
6 Thread Size/Probe Diameter |
7 Lead Wire Material |
8 Lead Wire Length |
9 Termination Style |
10 Special Features |
---|---|---|---|---|---|---|---|---|---|
RF1 |
2 | Element Type |
---|---|
T | 100 Ω DIN 00385 (thin film) |
U | 500 Ω DIN 00385 (thin film) |
W | 1000 Ω DIN 00385 (thin film) |
X | 120 Ω Nickel DIN 00672 (thin film) |
Y | 100 Ω DIN 003916 (wire wound) |
Z | 500 Ω DIN 003916 (wire wound) |
Q | 10 Ω copper (thin film) |
3 | Element Accuracy |
---|---|
A | Class A (0.06%) |
B | Class B (0.12%) |
4 | Wire Configuration |
---|---|
2 | 2-wire |
3 | 3-wire |
4 | 4-wire |
5 | Insertion Length |
---|---|
W | 1/2″ |
X | 5/8″ |
Y | 3/4″ |
Z | 1″ |
6 | Thread Size |
---|---|
A | 1/4-28/1/8″ diameter |
B | 1/4-20/1/8″ diameter |
C | 10-32 (Grounded only) |
D | 8-32 (Grounded only) |
E | M5 X 0.8 pitch |
F | M6 x 1 pitch/1/8″ diameter |
G | M8 x 1 pitch/3/16″ diameter |
H | M8 x 1.25 pitch/3/16″ diameter |
J | M10 x 1 pitch |
K | M10 x 1.25 pitch |
P | M10 x 1.5 pitch |
R | M12 x 1.25 pitch |
S | M12 x 1.5 pitch |
W | M12 x 1.75 pitch |
X | 1/2-20 |
Y | 1/8″npt |
7 | Lead Wire Material |
---|---|
A | Fiberglass (800°F) |
B | Fluoropolymer (400°F) |
C | Fiberglass with stainless steel braid (800°F) |
D | Fluoropolymer with stainless steel braid (400°F) |
E | Fiberglass with armor cable (800°F) |
F | Fluoropolymer with armor cable (400°F) |
Options C & D require a transition fitting for thread size options F, H & M (transition fitting 3/16″ OD X 1″ long) |
8 | Lead Wire Length |
---|---|
6-999 |
Over 999″ contact factory |
9 | Termination Style |
---|---|
A | 2″ stripped leads (bare ends) |
B | 2″ stripped w/ #8 spade lugs |
C | Standard male 2-pin plug (400°F) |
D | Standard male 3-pin plug (400°F) |
F | Standard 2-pin female jack (400°F) |
G | Standard 3-pin female jack (400°F) |
H | Miniature male 2-pin plug (400°F) |
P | Miniature male 3-pin plug (400°F) |
J | Miniature female 2-pin jack (400°F) |
K | Miniature female 3-pin jack (400°F) |
R | Dual molded male 4-pin plug (400°F) (for dual 2 wire) |
T | Dual molded female 4-hole jack (400°F) (for dual 2 wire) |
W | 2″ stripped leads w/ pin terminals |
Q | 2″ stripped leads w/ wire ferrules |
X | Extra long lead wire length (beyond 2” stripped leads) |
10 | Special Features |
---|---|
None | |
02 | 1.5″ long strain relief spring |
03 | 1.5″ long heat shrink where wire exits the probe |
06 | Epoxy seal |
07 | Cable Clamp |
08 | Bx Connector |
09 | Mating connector |
27 | Transition Fitting on tube & wire sensor |
32 | 1/4-28 bolt w/ 5/16” hex (small hex) |
33 | 1/4-28 bolt w/ 7/8” long thread (7/16” hex) |