Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
Excel Automation is an authorized East Coast Sensors distributor. Contact us with sales and technical support.
1 Series |
2 Calibration |
3 Thread Size |
4 Insertion Length |
5 Junction |
6 Lead Wire Material |
7 Lead Wire Length |
8 Termination Style |
9 Special Features |
---|---|---|---|---|---|---|---|---|
TF1 |
2 | Calibration |
---|---|
J | Type J |
K | Type K |
T | Type T |
E | Type E |
3 | Thread Size |
---|---|
A | 1/4-28 (standard) |
B | 1/4-20 |
C | 10-32 (Grounded only) |
D | 8-32 (Grounded only) |
E | M5 x 0.8 pitch |
F | M6 x 1 pitch |
G | M8 x 1 pitch |
H | M8 x 1.25 pitch |
J | M10 x 1 pitch |
K | M10 x 1.25 pitch |
P | M10 x 1.5 pitch |
R | M12 x 1.25 pitch |
S | M12 x 1.5 pitch |
W | M12 x 1.75 pitch |
X | 1/2-20 |
4 | Insertion Length |
---|---|
T | 3/8″ |
W | 1/2″ (standard) |
X | 5/8″ |
Y | 3/4″ |
P | 7/8″ |
Z | 1″ |
Q | 1-1/8″ |
5 | Junction |
---|---|
G | Grounded (standard) |
U | Ungrounded |
6 | Lead Wire Material |
---|---|
A | Fiberglass (800°F) |
B | Fluoropolymer (400°F) |
C | Polyimide (500°F) |
E | High temperature fiberglass (1200°F) |
F | Fiberglass with stainless steel braid (800°F) (standard) |
G | Fluoropolymer with stainless steel braid (400°F) |
H | Fiberglass with armor cable (800°F) (standard) |
J | Fluoropolymer with armor cable (400°F) |
K | Polyimide with armor cable (500°F) |
L | High temperature fiberglass with armor cable (1200°F) |
M | Fiberglass with stainless steel braid with armor cable (800°F) |
W | Fluoropolymer with stainless steel braid with armor cable (400°F) |
Wire gauge determined by ECS based on sheath diameter |
7 | Lead Wire Length |
---|---|
6-999 |
Over 999″ contact factory |
8 | Termination Style |
---|---|
A | 2″ stripped leads (bare ends) |
B | 2″ stripped leads w/ spade lugs |
C | Standard male plug (400°F) |
D | High temp male plug (660°F) |
E | Max temp male plug (800°F) |
G | Solid pin plug |
H | Standard female jack (400°F) |
J | Miniature plug (400°F) |
K | Miniature jack (400°F) |
L | 2″ stripped leads w/ #6 Ring terminals |
N | Standard 3 pin plug w/ ground wire (400°F) |
W | 2” stripped leads w/ pin terminals |
Q | 2” stripped leads w/ wire ferrules |
X | Extra long lead wire length (beyond 2” stripped leads) |
9 | Special Features |
---|---|
None | |
01 | Solid conductor (Lead wire) |
02 | 1.5″ long strain relief spring |
03 | 1.5″ long heat shrink where wire exits the probe |
04 | Flat tip probe |
05 | Drill point tip |
06 | Epoxy seal |
07 | Cable Clamp |
08 | Bx Connector |
09 | Mating connector |
11 | International IEC 584-3 color coded leads |
12 | British color coded leads |
13 | German color coded leads |
14 | Japanese color coded leads |
15 | Reverse polarity color coded leads |
16 | French color coded leads |
18 | Moisture protection boot on connector |
29 | Silver solder thermocouple junction |
32 | 1/4-28 bolt w/ 5/16” hex (small hex) |
33 | 1/4-28 bolt w/ 7/8” long thread (7/16” hex) |
35 | Spring loaded bolt |
- 20 AWG stranded wire comes standard on nozzle bolt type thermocouples
- Bolt is free spinning on standard designs
- For custom thread lengths consult factory