Hi-Density 1/8″ Miniature Cartridge Heaters – Electrical Termination

/Tempco/Data-Assets/02-Cartridge-Images/WebC091.jpg

Type N: External Pins with Leads

Flexible stranded lead wires have fiberglass insulation and are connected to 1-1/4″ (32 mm) long solid conductors. Silicone rubber-coated fiberglass sleeving insulates the pin/lead wire connection.

/Tempco/Data-Assets/02-Cartridge-Images/WebC002.jpg

Type F: Internally Connected Flexible Leads

The fiberglass lead wires are internally connected to the terminal pins. This lead termination provides flexibility, permitting the lead wires to be sharply bent as they exit the heater.

/Tempco/Data-Assets/02-Cartridge-Images/WebC004.jpg

Type M3: Teflon® End Plug Seal

A moisture-resistant Teflon® seal that is swaged in during the manufacturing process with Teflon® insulated lead wire.

/Tempco/Data-Assets/02-Cartridge-Images/WebC0010.jpg

Type W: Wire Braided Leads

Stainless steel braid over fiberglass leads offers sharp bending not possible with armor cable, as well as abrasion protection.

/Tempco/Data-Assets/02-Cartridge-Images/WebC041.jpg

Type C1: Straight Armor Cable with Coupling

Armor cable provides the maximum in protection for abrasive, jagged environments. The coupling between the cartridge and the armored cable is mechanically fastened or silver brazed.

*Limited to C1B: SS Cable, Mechanically Fastened for 1/8″ Miniature Cartridge Heaters.

Excel Automation Inc.