The shield clamps LFZ-M|MSKL are easy to use and effective in grounding single cable shields.
Due to its special design the clamping ranges of the MSKL are very large while the dimensions are comparatively small. (Example: MSKL 3-12, assembled with a 12 mm (0,472″) cable shield: width 26.25 mm (1,033″)).
LFZ-M|MSKL shield clamps can be attached on sheet metal (e.g. mounting plates) using M4 screws. The type LFZ-M|MSKL allows cables to be secured with a cable tie. Strain relief in accordance with EN 62444 is achieved.
The EMC shield clamp LFZ-M|MSKL is also available as 45° and 90° angled version. The 45° angled type is suitable for the use in frequency converters from various manufacturers. Thus, the cable can be inserted in a 45° angle into the wiring duct. For the cable routing and strain relieving on edges the 90° angled type can be used.
Excel Automation is an authorized icotek distributor. Contact us with sales and technical support.
Advantages
- Large clamping areas, therefore less product sizes needed to cover a large cable diameter range
- Space-saving design, even when fully assembled
- Large contact area
- Simple mounting, easy assembly
- With integrated strain relief acc. to EN 62444
- The spring design requires no adjustments and will permanently maintain contact to the cable shield
- Shock and vibration resistant, maintenance free
Specifications
- Shield clamp type: Single clamp
- No. of shield clamps: 1 × MSKL
- Material shield clamp: Spring steel, zinc plated
- Material mounting foot: Mild steel, galvanically zinc plated
- Mounting type: Screw type mounting
- Mounting location: Metal sheets
- With strain relief