Standard Side Mount Thermowell With Clamp
The standard Side Mount Thermowell with Clamp is a 5″ long, 4 mm ID quartz glass tube, installed in the short side of the panel, just behind the resistance coil. The screw pressure clamp and thermowell are designed to hold a 0.125″ diameter probe.
Replacement TC Probes (with 48″ leads, SS overbraid)
Type K — Part Number: MTA00839
Type J — Part Numbe: MTA00840
Back Mount Thermowell with Compression Fitting
The optional Back Mount Thermowell with Adjustable Compression Fitting is a short, 4 mm ID quartz glass tube, mounted perpendicular to the face with a ceramic disk at the bottom. The compression fitting and glass tube are sized for a 0.125″ diameter probe.
Replacement TC Probes (with 48″ leads, SS overbraid)
Type K — Part Number: MTA00839
Type J — Part Numbe: MTA00840
Back Mount Thermowell with Bayonet Fitting
Back Mount Thermowell with Bayonet Fitting
The optional Back Mount Thermowell with Bayonet Fitting is a short, 8 mm ID quartz glass tube, mounted perpendicular to the face with a ceramic disk at the bottom. The bayonet fitting and glass tube are sized for a 0.187″ diameter probe.
Replacement TC Probes (with 48″ leads, SS overbraid)
Type K — Part Number: TCP50270
Type J — Part Number: TCP50269
Back Mount Thermowell – Parallel to Face
The optional Back Mount Thermowell (Parallel to Face) is a 5″, 6 mm ID quartz glass tube with a soft 90° bend, mounted along the face, exiting in the rear. A maximum 0.063″ diameter probe is required to make the bend. Screws and ceramic spacers are provided.
Replacement TC Probes (with connector set)
Type K — Part Number: MTA01546
Type J — Part Number: MTA01775
Eagle Sensors & Controls is an authorized Tempco distributor. Contact us for sales and application support.