Excel Automation is an authorized distributor of Panasonic / Sunx products. Contact us with sales and application support.
| Type | Standard type | 2-output type | Cable type (Analog output type) |
|
|---|---|---|---|---|
| Model No. |
NPN output | FX-501 | FX-502 | FX-505-C2 |
| PNP output | FX-501P | FX-502P | FX-505P-C2 | |
| CE marking directive compliance | EMC Directive, RoHS Directive | |||
| Supply voltage | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less | |||
| Power consumption | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type) |
|||
| Output (2-output type and cable type: Output 1, Output 2) |
<NPN output type> NPN open-collector transistor • Maximum sink current: 100 mA (2-output type and cable type are 50 mA) (Note 2) • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 2 V or less (Note 3) (at maximum sink current) <PNP output type> |
|||
| Output points | 1 point | 2 points | ||
| Output operation | Switchable either Light-ON or Dark-ON by L/D mode | |||
| Short-circuit protection | Incorporated | |||
| Response time | H-SP: 25 μs or less, FAST: 60 μs or less, STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable | |||
| Analog output (Cable type only) |
Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note 4)], Response time: 2 ms or less, Zero point: Within 4 mA ±1 % F.S., Span: Within 16 mA ±5 % F.S., Linearity: Within ±3 % F.S., Load resistance: 0 to 250 Ω | |||
| External input (2-output type only, switchable with Output 2) |
– | <NPN output type> NPN non-contact input • Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC (at 0.5 mA source current) • Input impedance: 10 kΩ approx. <PNP output type> |
||
| Possible external input function |
– | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable | ||
| Sensitivity setting | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment | |||
| Incident light intensity display range |
H-SP / FAST / STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999 | |||
| Timer function | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay • OFF-delay / ON-delay • One-shot timer, switchable either effective or ineffective | <Output 1> Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay • OFF-delay / ON-delay • One-shot timer, switchable either effective or ineffective |
||
| <Output 2> Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
||||
| Timer period | Timer range “ms”: 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx., Timer range “sec.”: 0.5 s approx., 1 to 32 s approx., 1 s approx., Timer range “1/10 ms”: 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx., each output is set individually |
|||
| Light emitting amount selection function |
Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] | |||
| Interference prevention function |
Incorporated (Note 5), selectable either automatic interference prevention or different frequency | |||
| Various settings | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. | |||
| Protection | IP40 (IEC) | |||
| Ambient temperature |
-10 to +55 ℃ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units (cable type: 8 to 12 units) are mounted in cascade: -10 to +45 ℃ +14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
|||
| Emitting element (modulated) |
Red LED (Peak emission wavelength: 643 nm 0.025 mil) | |||
| Material | Enclosure, Case cover: Polycarbonate, Switch: Polyacetal | |||
| Cable | – | 0.2 mm2 6-core cabtyre cable, 2 m 6.562 ft long |
||
| Cable extension | – | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
||
| Weight | Net weight: 15 g approx., Gross weight: 70 g approx. | Net weight: 60 g approx., Gross weight: 100 g approx. |
||
| Accessory | FX-MB1 (Amplifier protection seal): 1 set | |||