Excel Automation is an authorized distributor of Panasonic / Sunx products. Contact us with sales and application support.
| Type | Discrete wire type | M12 connector type | |
|---|---|---|---|
| Model No. | FX-551L3-P-C2 | FX-551L3-P-J | |
| Regulatory compliance | EMC Directive, RoHS Directive | ||
| Supply voltage | 12 to 24 V DC +10−15 % Ripple P-P 10 % or less | ||
| Power consumption | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 720 mW or less (current consumption 30 mA or less at 24 V supply voltage) |
||
| Communication output (C/Q) (Note 2) |
IO-Link communication |
IO-Link Specification V1.1 | |
| Baud rate | COM3(230.4kbps) | ||
| Process data | 4byte | ||
| Minimum cycle time |
1.0ms | ||
| Control output (DO) | PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (Note 3) (at maximum source current) |
||
| Output operation | Switchable either Light-ON or Dark-ON by L/D mode | ||
| Short-circuit protection | Incorporated | ||
| Response time | STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable | ||
| Sensitivity setting | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment | ||
| Incident light sensitivity setting | STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999 | ||
| Incident light intensity display range |
STD：0～4,000、LONG：0～8,000、U-LG / HYPR：0～9,999 | ||
| Timer function | Incorporated with variable OFF-delay / ON-delay / One-shot, switchable either effective or ineffective | ||
| Timer period | 0.1 to 999.9 ms approx., in units of 0.1 ms approx. | ||
| Different frequency interference prevention function (Note 4) |
Incorporated (up to 4 units). Note that the response time varies depending on the setting. F-1: 0.8 ms or less, F-2: 0.9 ms or less, F-3: 1.0 ms or less, F-4: 1.7 ms or less |
||
| Protection | IP40(IEC) | ||
| Ambient temperature | -10 to +55℃ +14 to +131℉ (If 4 to 7 units are mounted in cascade: -10 to +50℃ +14 to +122℉ or if 8 to 16 units are mounted in cascade: -10 to +45℃ +14 to +113℉) (No dew condensation or icing allowed), Storage: -20 to +70℃ -4 to +158℉ |
||
| Emitting element (modulated) | Red LED (Peak emission wavelength: 660 nm 0.026 mil) | ||
| Material | Enclosure, Case cover: Polycarbonate, Switch: Polyacetal | ||
| Cable | 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long | 0.2 mm2 cabtyre cable with M12 connector, 0.3 m 0.984 ft long | |
| Cable extension | Extension up to total 20 m 65.617 ft is possible with 0.3 mm2, or more, cable. (Condition of CE compliance: less tan 20 m 65.617 ft) (however, supply voltage 12 V DC or more) |
||
| Weight | Net weight: 55 g approx., Gross weight: 80 g approx. | Net weight: 35 g approx., Gross weight: 60 g approx. | |