| Stepper Motor | |
| Motor Shaft | Single shaft |
| Frame size | 85 mm |
| Motor type | Geared with brake built-in |
| Rated Current (A/Phase) | 1.4 A |
| Rotor Inertia | 2700 g.cm |
| Motor Length | 145 mm |
| Resistance (ohm/phase) | 2.6 |
| Basic Step Angle | 0.144 A |
| Gear Ratio | 1:05 |
| Allowable Angle | 0 ~ 360 |
Sensor, Inductive Prox, 4mm Sensing, M12 Round, Non-Shielded, PNP NO, 12 – 24 VDC Proximity Sensor Type Cylindrical round (PR Series) Sensing Distance 4 mm Header demension / square 12 mm Shield Non Shield Connection Type 2 m cable loose leads Voltage 12 – 24 VDC Wire Type DC 3-wire Output Type PNP Frequency 500 … Continue reading Autonics PR12-4DP →
Add to cart
Sensor, Inductive Prox, 17mm Square, 8mm End Detection, DC, NPN, NO, 3 Wire, 12 – 24 VDC Proximity Sensor Type Rectangular (PS/PSN Series) Sensing Distance 8 mm Header demension / square 17 mm square Voltage 12 – 24 VDC Wire Type DC 3-wire Output Type NPN Frequency 200 Hz Housing Size 17 x 17 x … Continue reading Autonics PSN17-8DN →
Add to cart
Sensor, Capacitive Prox, 18mm Round, Shielded, DC, NPN, NO, 3 Wire, 12 – 24 VDC Proximity Sensor Type Electric capacitive (CR Series) Sensing Distance 8 mm Header demension / square 18 mm Shield Shield Voltage 12 – 24 VDC Wire Type DC 3-wire Output Type NPN Frequency 50 Hz Housing Size 18 x 71.5 mm
Add to cart
Encoder, Incremental, 50mm, 8mm Shaft, 360 PPR, A,B,Z, Totem pole output, 12 – 24 VDC Rotary Encoder Type Incremental Shaft type 50 mm Shaft Resolution 360 Output phase A,B,Z Control output Totem Pole Power supply 12-24 VDC å±5% Connector type Cable
Add to cart