Panels are normally supplied unassembled with all necessary hardware to assembly and install included. Can be furnished completely assembled at an additional cost.
Jack Panel for Standard TC Connectors: 5-1/2″ and 10″ Long Bezel Jack Panel for Standard Thermocouple Connectors
- ✴ Accepts standard plugs.
- Jacks are ANSI color coded, glass-filled nylon with a temperature rating of 350°F (177°C) continuous and 400°F (204°C) intermittent.
- Panels are manufactured from rugged, .090″ thick aluminum.
- Brushed and anodized finishes are available at an additional cost.
- Panels are normally supplied unassembled with all necessary hardware to assemble and install included. Can be furnished assembled at an additional cost.
Jack Panel for Miniature TC Connectors
- Designed to be space saving.
- Complements modern miniature instrumentation.
- Jack bodies are ANSI color coded, glass-filled nylon with a temperature rating of 350°F (177°C) continuous and 400°F (204°C) intermittent.
- Panels are manufactured of rugged .090″ thick aluminum.
- Brushed and anodized finishes are available at an additional cost.
- Panels are supplied unassembled for ease of wiring—all hardware necessary to assemble is included.
Jack Panel for 3-Pin Connectors
- For use with RTDs and shielded thermocouples requiring 3 wires.
- Will accept standard 3-Pin connectors.
- Jack bodies are ANSI color coded, glass-filled nylon with a temperature rating of 350°F (177°C) continuous and 400°F (204°C) intermittent.
- Panels are manufactured of rugged .090″ thick aluminum.
- Brushed and anodized finishes are available at an additional cost.
- Panels are supplied unassembled for ease of wiring — all hardware necessary to assemble is included.
Jack Panel for Miniature 3-Pin Connectors
- For use with RTDs and shielded thermocouples requiring 3 wires.
- Complements modern miniature instrumentation.
- Jack bodies are ANSI color coded, glass-filled nylon with a temperature rating of 350°F (177°C) continuous and 400°F (204°C) intermittent.
- Panels are manufactured of rugged .090″ thick aluminum.
- Brushed and anodized finishes are available at an additional cost.
- Panels are supplied unassembled for ease of wiring—all hardware necessary to assemble is included.
Jack Panel with Jab-in Style Termination
- Accepts Standard Plugs.
- Jacks will accept up to 14-gauge wire.
- Jack bodies are ANSI color coded, glass-filled nylon with a temperature rating of 350°F (177°C) continuous and 400°F (204°C) intermittent.
- Panels are manufactured of rugged .090″ thick aluminum.
- Brushed and anodized finishes are available at an additional cost.
- Jack rows are placed further apart than standard Jack Panels for ease of termination.
- Panels are supplied unassembled for ease of wiring — all hardware necessary to assemble is included.
Request Custom Jack Panel
- Jack Panels are designed to be used with standard FS Style boxes.
- Panels are manufactured of rugged .090″ thick aluminum.
- Panels are designed to accept the safest maximum number of Jacks.
- Available for Standard and Miniature Jacks, 2-pin or 3-pin.
- Rated for 350°F (177°C) continuous and 400°F (204°C) intermittent.
- Panels measure 2-13/16″ high × 4-1/2″ long.
Request Custom Rack Panel
- Panels are made of .090″ thick aluminum with a smooth mill finish.
- All panels have slotted holes positioned at E.I.A. standard spacing.
- Panels are available with any of the standard or miniature Panel Jacks shown in this section.
- Rack Panels come in standard heights of 3-1/2″, 5-1/4″, 7″, and 8-1/4″.
- Panels are supplied unassembled for ease of wiring—all hardware to assemble is included.